Mounting Options: Stainless steel letters

​​Strap Mount

Thin metal straps recessed into back and soldered to return. Stud boss welded to strap to receive threaded studs. The strap helps strengthen returns of letter. This is the default mounting method for fabricated letters. Not for use with LED lighting systems as shadowing may occur.

​​Removable Can Mount

Stainless '' L " bracket with bosses to receive threaded studs is held in place with truss head machine screw. Due to bracket size, a minimum 4'' high and minimum 1/2'' deep letter & stroke is required. This allows the can to be removed from the letter back for servicing LEDs.

Shadow Free Mount

Threaded metal stud mount glued to inside of can. Thread size 10-24 for letters up to 12'' high. Thread size 1/4-20 for letters greater than 12'' and up to 24''. Smaller letters could also use this mount to receive pads with studs for a flush pad mount. Stroke and depth limitations may apply.


Lexan Back

Lexan backs are cut to fit within the inside of the return. This is not a perfect fit but is close. '' L '' brackets are glued to the inside return of the can. The lexan is attached to the '' L '' bracket with stainless flat head screws. Lexan is flush with back of letter. Holes are drilled through lexan to allow for mounting studs into '' L '' brackets. Lexan is available in clear or light diffusing, Optional: detachable studs.

​​Side Mount

Stainless '' L '' bracket with bosses to receive threaded studs is glued to inside return. Due to bracket size, a minimum 4'' high and minimum 1/2'' deep letter & stroke is required.


​​Steel Back

Steel backs are laser cut to fit within the inside of the return. This is not a perfect fit but is close. '' L '' brackets are glued to the inside return of the can. The steel is attached to the '' L " bracket in 1 of 2 ways: 1. Loose tacked welded which is not removable. 2. Holes drilled through steel to allow for pan head screw onto '' L '' bracket. Both methods have holes drilled for mounting studs. Backs are available raw, finished or painted steel. Steel backs are recessed slightly to allow screw heads to be flush with back of letter. Optional: detachable studs.
Engineered Stud

Holes and bosses in bottom/top to receive threaded studs. Backs and internal structure are included for additional support. Stud diameter may also vary per architect specifications. Rounded letters will require flattening.
Sales: 843-580-5116
Fax: 843-580-5113
sales@signsinaminute.com