Flat Laser Cut Metal Letters

Advantages in using
Flat Cut Metal Letters

  • Sizes range from 1''* - 60''
  • Waterjet or laser cut edges
  • Unlimited paint colors
  • Anodizing and Polishing
  • 5 different metals
  • Produced 15 business days
Buy Today!
Get a Quote
  1. Lorem ipsum
  2. Lorem ipsum
  3. Lorem ipsum
  4. Title 4
  5. Title 5
  6. Title 6
  7. Title 9
  8. Title 10

Laser cut metal letters and logos, provide greater detail than router letters. With six thicknesses and over 50 finishes available, bronze, aluminum, brass, copper, stainless steel, and Cor-Ten, you can replicate a typestyle that is not within our standard typestyle inventory.

Metal Paint Colors
Mounting Options
Standard Fonts
SUBMIT YOUR ARTWORK
Send vector line art files with all fonts converted to curves in ai, or eps,
Note: Vertical grain is standard on all cut metal letters. Horizontal grain can be requested.
Aluminum Finishes
Brushed or Primed for Paint, Polished, Paint, Novveau Patina, Rust Powercoat, Clear Anodized, Polished Clear Anodized, Gold Anodized, Polished Gold Anodized, Medium Bronze Anodized, Polished Medium Bronze Anodized, Dark Bronze Anodized, Polished Dark Bronze Anodized, Black Anodized, Polished Black Anodized.

Note: Polished & Anodized finishes require a minimum 2'' height and 1/4'' depth or 3'' height and 1/8'' depth stud mounts required. Restrictions may apply on letters over 24''. Champagne and Light Bronze anodized colors also available. Actual color may vary from order to order due to the anodizing process.


Bronze Finishes
INCREDIBLE PRECISION
Brushed, Polished, Oxidized, Dark Oxidized, Turquoise Patina, Traditional Verde Patina.

Note: All Patinas, by their very nature, will vary from letter to letter and order to order. These finishes will change in appearance over time depending on contact with moisture and temperature. Patinas can bleed onto the installation surface when installed outside. The only exception is the Nouveau Patina, which is a power-coated, simulated Patina finish on an aluminum letter.

Polished finishes require a minimum 2'' height and 1/4'' depth or 3'' height and 1/8'' depth stud mounts required. Restrictions may apply on letters over 24''.


Steel Finishes
Brushed Stainless, Polished Stainless & Cor-Ten.

Alloy C304 is the standard stainless, it is the most versatile and most widely used stainless steel. ( For areas within 50 miles of the coast. We recommends Alloy 316. This conforms to recommendations by numerous metal industry panels. Use of 304 in coastal areas may experience premature failure.

Alloy 316 is the standard molybdenum-bearing grade. The molybdenum gives 316 better overall corrosion resistant properties than C304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Cor-Ten a weather resistant steel created by alloying copper, chromium and nickel. The material forms its own protective layer when exposed to atmospheric elements. Essentially, the top layer corrodes which then protects the steel beneath it. The natural finish does not normally require any form of maintenance such as painting.

Polished finishes require a minimum 2'' height and 1/4'' depth or 3'' height and 1/8'' depth stud mounts required. Restrictions may apply on letters over 24''. All stainless steel letters and logos are shipped without a clear polyurethane coating. 

Brass and Copper Finishes
Brushed, Polished, Oxidized, Dark Oxidized.

Note: Letters 2'' and under have limted style availability based on the inside radius.

Polished finishes require a minimum 2'' height and 1/4'' depth or 3'' height and 1/8'' depth stud mounts required. Restrictions may apply on letters over 24''.

Sales: 843-580-5116
Fax: 843-580-5113
sales@signsinaminute.com